GIAC Flashloader Mobile for B8.5 S4/C7 A6 2013-2016 3.0TFSI engine Stage 1
$1,100.00
The GIAC Flashloader Mobile (FLM) Device is a new tool that allows enthusiasts to load or remove GIAC performance programs on to their vehicle.
Description
We are pleased to present the GIAC Stage 1 Flashloader Mobile device ECU tune for Audi B8.5 S4 and C7 A6 (2013-2016) with 3.0 TFSI engine.
The Flashloader Mobile (FLM) is pocket-sized, durable, and does not require a laptop or PC during the flash. Files and commands are stored on a USB memory stick, that can be customized by the end-user. The end-user can use the device as a flashing tool, 25-channel logger, or performance mode switcher, to code clearer or to some combination of each.
The ECU upgrade done by the Flashloader Mobile device replaces the standard software in your car's engine control unit without any physical modifications. In other words, the tune adjusts ignition timing, fuel delivery, boost settings, rev limiter, and/or speed limiters to optimize performance and, in some applications, fuel economy.
GIAC's understanding of vehicle controllers goes much deeper than simple table variable modification. While most "tuners" can only add and subtract from existing tables in the Engine Control Unit, we have the ability to change the functionality of the ECU at the code level, allowing for a complete calibration and even creation of new tables and functions.
GIAC map switching gives customers the ability to change performance settings in their vehicle without a visit to the shop. The switch takes a couple of seconds and can even be done while the vehicle is idling. We have tuning products for fuel quality ranging from 91 to 109 octane covering both normally aspirated and turbo models.
GIAC Flashloader Mobile device options for B8.5 S4 and C7 A6 3.0 TFSI
Flashloader Mobile device comes with Stage 1 ECU upgrade or pump mode as GIAC called it. The FLM device allows users to switch between optional maps/modes in the ECU upgrade with the touch of a button. Pump mode is an upgraded map that is optimized for pump fuel. This mode can be used with 91 octane fuel compatible. For optimum results use 93 octane fuel. There are a few options which could be added to the pump mode:
- Race Gas Mode - for an additional $200. It gives additional power and should only be used with the high-octane fuel.
- Stock Power Mode - for an additional $50. The ECU of the car is switched to factory settings.
- Valet Power Mode - for an additional $50. It will reduce the engine output to prevent other people (valets :)) from abusing your car.
- Transmission Flash - for an additional $650. This flash allows the transmission to hold higher torque levels with faster acceleration and quicker shifts.
If you would like to add any of the additional options, you can write that in the "Order Notes" at the Checkout or you can send us an email at contact@bestiale.net or use any of the forms here.
Specifications
- This program increases power and torque performance to provide a completely different driving experience under all conditions.
- More Boost
- Optimized fuel and timing
- Increased torque limits
Requirements and recommendations
Requirements
There are no additional parts that are required to be installed for the Stage 1 ECU tune.
Recommendations
Adding a quality performance intercooler, intake and/or cat back exhaust system will improve performance.
Also, we highly recommend the car to be in perfect mechanical condition.
Installation details
Once you order your GIAC Flashloader Mobile Device, there are one of two options:
- Option 1 - If you are able to read your current ECU part number (with a VagCom or similar scan tool), we will send you the Flashloader Mobile Device ready to go with your specific performance and stock files.
- Option 2 - If you are unable to send us your ECU part number upon ordering, we will send you the Flashloader Mobile Device and once you receive it, you will simply plug it in to create a read file, and we will send the necessary performance files to load onto your device.
More information on how to use the device, you can read GIAC Flashloader Mobile user guide
Warranty and returns
Warranty
GIAC products carry a 30-day money-back guarantee. Also, GIAC Flashloader Handheld (FHH) and Flashloader Mobile (FLM) devices carry a 30-day money-back guarantee and a one-year GIAC product replacement guarantee. For details click here.
Returns
If you are not satisfied with the product, you can return it within 30 days for a full refund of the software (less installation). To clarify, all returns must be made at the original point of sale within 30 days of receipt of merchandise. Custom designed or engineered products are non-returnable.
About GIAC

Additional information
Weight | 1 lbs |
---|---|
Dimensions | 12.5 × 9.5 × 3.5 in |
Only logged in customers who have purchased this product may leave a review.
Make | Model | Chassis | Engine | Details |
---|---|---|---|---|
Audi | A6 | C7 (2012-2018) | 3.0T | FWD |
Audi | A6 | C7 (2012-2018) | 3.0T | Quattro |
Audi | S4 | B8.5 (2012-2016) | 3.0T | Quattro |
Reviews
There are no reviews yet.